Site icon Mohakeem

How Pavement Repairs Can Save You Money

Pavement repairs can keep your street looking neat and safe, but they also need to be done correctly in order to avoid long-term issues that could cost you extra money in the future.

Thankfully, paving experts offer several effective solutions to fix common pavement issues. Here are some of the most popular solutions:

Pothole Repair

Potholes are depressions in the road surface that can damage tyres on cars and bikes, affect vehicle wheel alignment, suspension and frame alignment, leading to accidents as well as much inconvenience for drivers.

Thankfully, there are various paving repairs you can use to fix these holes and protect your roads from further deterioration. Patching is one of the most popular solutions, which involves placing a small amount of asphalt mix into the hole then compacting it either by hand tamping or using a mechanical compactor.

The main type of pothole repair is semi-permanent, which utilizes spray injection technology. Although this requires more effort, it is one of the most effective pothole repairs available and can be applied to both asphalt and concrete surfaces alike.

This type of repair is the most frequent, yet it can be tricky to apply due to the need to get just the right amount of mixture. Excessing either too much or using too little can lead to burns on your hands if not done correctly.

If you don’t possess the necessary equipment, hiring a professional asphalt paver contractor adelaide is your best bet. They’ll have all of the necessary tools and materials such as a trailer to fill potholes with cold-lay tarmac or an air compressor to blow out debris and water.

A reliable asphalt contractor will ensure you have enough material for the job and store it at the appropriate temperature to extend repair longevity. This saves money on materials and labor since you won’t have to transport it back and forth repeatedly to the same pothole.

A reliable way to guarantee a long-lasting patch is to seal it after application with special sealcoat. This method helps prevent further deterioration of the pothole and keeps traffic moving smoothly on your streets.

Crack Sealing

Cracks in asphalt pavement allow water to seep into the structure beneath, leading to deterioration. Sealing these cracks allows your pavement to be repaired before any serious harm arises.

Crack sealing is an effective preventive maintenance measure that can extend the life of asphalt pavement by 3-8 years, according to the American Concrete Pavement Association. However, it’s essential that you select the appropriate crack sealant for the job and take time to follow its manufacturer’s instructions closely.

A hot-pour, specially prepared sealant is used to fill cracks and prevent moisture and non-compressible materials from seeping into pavement structures. The type of crack sealant and application technique should be determined based on job requirements, weather conditions, traffic volume and existing pavement condition.

Crack sealant should be applied when cracks are partially open (winter) or closed (summer). This is essential for proper adhesion and will guarantee that the sealant doesn’t sag over time.

Once applied, hot-pour sealant will harden within a few hours and become waterproof. Normally, traffic on the surface should not begin until after curing has taken place and dried completely; this helps reduce the chance of damaging the surface during curing.

If a hot-pour crack sealant is not applied correctly, the treatment could fail or cause further harm to pavement. To avoid this outcome, cracks should be routed and cleaned prior to being sealed.

Different configurations of hot-pour sealant can be employed in cracks. These include flush fill, overband, reservoir and combination applications.

When selecting the configuration for a crack, O’Driscoll recommends considering its width and depth when selecting the thickness of sealant needed to fill in the space.

Another factor to consider when performing crack sealing is the temperature of the asphalt pavement. Operating crack sealing when temperatures are too cold can reduce its effectiveness and shorten its life expectancy. If temperatures are not sufficient, an air lance can be used to gently warm up cracks before they are sealed.

Infrared Heater Repair

Infrared asphalt repair can be a cost-effective solution for paving professionals to address certain types of issues. Infrared asphalt repair is commonly used to patch small cracks and divots in roads and parking lots, as well as to resurface uneven paved surfaces affected by drainage problems.

Infrared asphalt repair is a process that involves heating the damaged area of paving surface and then mixing in new asphalt to complete the job. Depending on how severe the damage, this could take anywhere from 5 to 10 minutes. Once heated, team members will rake away any loose aggregate before adding new materials.

This process is not only eco-friendly, but also fast and economical. Infrared heat penetrates deep into damaged asphalt without harming the existing aggregate underneath it, thus eliminating the need to rip up existing material and replace with new, which is more costly and may cause environmental concerns.

Therefore, this paving repair method has become popular among contractors who need to save time and money while still delivering high-quality results. For instance, Doctor Asphalt in Fitchburg, Wisconsin uses this technology for sidewalks and parking lots repairs.

The infrared repair process is not only eco-friendly, but it’s also faster than other methods of repair. That means your job can be finished within hours rather than days or weeks as with traditional methods.

Another significant characteristic of infrared heat is that it doesn’t cause condensation, which could be hazardous for those sensitive to moisture. Furthermore, it prevents mold formation – another potential health hazard.

Infrared asphalt repair is a popular choice among many paving professionals due to its speedy and efficient nature. Plus, since it doesn’t need much equipment or manpower, infrared asphalt repair could be ideal for small companies that want to keep costs low while getting high-quality repairs.

Infrared paving offers many advantages, but it should be noted that this technology may not be appropriate for all paving projects. It cannot fix deeper structural or foundation issues with pavement and is also less durable than other paving solutions – meaning your investment won’t last indefinitely.


Patching asphalt can be a fairly straightforward task, but it requires that you have all of the right tools and supplies on hand. Not having enough of any item can make the whole process take longer, so ensure you have everything necessary when patching asphalt.

Before beginning to patch a hole, it is essential to first clear away all debris. This includes plants, roots and any other objects that have grown into the patched hole. Then fill up with coarse gravel and sand until it is only an inch deep.

Prior to applying hot mix asphalt, this step is absolutely essential for a successful patch job. Not only does it give the patch more support and prevent shifting or cracking during application of the final layer of hot mix, but it also creates an even base that will prevent it from shifting during final coat application.

Next, cut out a rectangular patch in rectangular shape and square up its edges with either a pavement saw or jack hammer. After cutting, apply a tack coat to vertical faces of cut so hot mix will adhere better to sides of patch.

After applying the hot mix asphalt, compact it with either a roller or vibratory plate compactor. If the repair requires backfilling an extensive patch, do so in multiple layers by placing each patching material at 4-inch intervals and compacting each as it is applied.

Finally, you must paint the patch area. This is an essential step in any parking lot repair job and especially crucial if you are patching an area marked with markers.

Patching asphalt repairs is often done under pressure from tight schedules and by teams. To guarantee a timely completion of the task while minimizing disruption to operations, assign each day’s work to someone or group of individuals and create an activity list with specific deadlines for completion. This ensures all tasks are completed as scheduled without disrupting operations.

Business Address: 28 Adelaide tce st marys 5042
Phone: 0430 042 058

Exit mobile version